COMBAT

COMBAT 250

Two component high temperature resistant epoxy coating designed to withstand aggressive chemical attack in applications up to 250 0F. 100% Solids/ No VOC’s. Available in a variety of colors including blue gray, light gray and red. Self-priming with good wear characteristics. Applied to metal surfaces, will flex with normal vibration and expansion.

COMBAT 350

Two component high temperature resistant epoxy coating designed to withstand aggressive chemical attack in applications up to 350 0F. 100% Solids/ No VOC’s. Self-priming with good wear characteristics. Applied to metal surfaces will flex with normal vibration and expansion.

COMBAT 450

Two component high temperature resistant epoxy coating designed to withstand aggressive chemical attack higher than most epoxy coatings in applications up to 450 0F.100% Solids/ No VOC’s. Self-priming with good wear characteristics. Applied to metal surfaces will flex with normal vibration and expansion.

COMBAT “PRIME”

All-purpose concrete sealant, Provides exceptional corrosion protection and serves as a primer for other COMBAT products. Excellent penetration into existing masonry surface, acts as a sealant to water and solvents.100% solids, low viscosity hybrid polymerrequires minimal surface preparation.

COMBAT “86”

High grade, two part, 100% epoxy broad spectrum corrosion resistant coating designed specifically to be used in exterior applications with minimal surface preparation. UV resistant withstands high temperatures to 250° F and will stick to any metal surface unprimed or badly scaled and corroded. The gray/silver color allows it to blend into most industrial applications. All-purpose corrosion cover-up.

COMBAT Diamond

High temperature extreme abrasion resistant metal repair compound. Harder than metal, contains an aggressive mixture of Silicon Carbide, Zirconia, Alumina and Ceramic Beads. 100% solids, no VOC’s epoxy mixture. Surface preparation is minimal.

COMBAT NuMetal

High temperature extreme abrasion resistant metal repair compound.Machinable grade of COMBAT Diamond. 100% solids, no VOC’s epoxy mixture. Surface preparation is minimal. Surface can be sanded for uniform finish.

COMBAT LiteCrete

Very light weight rock hard concrete repair system ideally suited to reinforce or fill decayed masonry materials.100 % Solids, no VOC’s two component mixture containing silica spheres resulting in a trowelable material lighter. No slump for overhead concrete repair.

COMBAT MS-150

High-strength high temperature structural adhesive, two distinctive colored thixotropic pastes for easily monitoringof blending. Adheres to metal and masonry surfaces. Ideally suited for a high temperature ceramic tile in applications exceeding 450° F. Perfect for bonding dissimilar materials.

COMBAT 250-D

COMBAT 250-D is a modified version of Combat 250, the workhorse of the COMBAT line of industrial coatings. COMBAT 250-D is specifically formulated with the addition of alumina to enhance abrasion characteristics for tough applications where coatings come in contact with abrasive slurry and dust. COMBAT 250-D withstands abrasion with less than 24 mg loss on ASTM –D-4060 at temperatures up to 250° F. Combat 250-D cures with a dark gray color. Combat 250 is self-priming and will flex with normal vi

COMBAT Defiance

COMBAT Defiance is an two-component mixture of tough asphalt and polymers designed to form a protective barrier to protect steel from chemical attack and abrasion from flying particulate in applications such as dust collectors and fan housings. COMBAT Defiance cures in situ, therefore exhibiting nominal shrinkage forming an elastomeric coating resistant to cracking from expansion and vibration from industrial equipment

COMBAT Tango Down

TANGO DOWN is available in two forms: Tango Down “Alpha & “Bravo.” Tango Down is specifically formulated to work as a rust preventative primer for either HT Mastic 500 or HT Mastic 500NF. Both products, Tango Down Alpha and Bravo, are designed to preserve freshly sand blasted surfaces from rust bloom infection.

COMBAT Flacjak

COMBAT “FLAcJAK” is a low cost 100% solids epoxy coating specifically designed to replace less efficient Coal Tar Epoxies. COMBAT “FlacJak” contains no VOC’s, which equates to NO SHRINKAGE after installation. When compared to conventional coal tar epoxy, less COMBAT “FlacJak” is required for identical cured film thickness.

HT Mastic 500 (t)

HT Mastic 500 (t) is a thicker TROWEL Grade of our workhorse dew point corrosion protection product HT Mastic 500. This product is thick enough to apply the entire 1/8" wet film thickness (WFT) in one application. It is available in both 53 gallon drums and 5 gallon pails.

HT Mastic 500NF (t)

HT Mastic 500NF (t) is a thicker TROWEL Grade of our workhorse dew point corrosion protection product HT Mastic 500NF. This product is thick enough to apply the entire 1/8" wet film thickness (WFT) in one application. It is available in both 53 gallon drums and 5 gallon pails.


Basket


ProductQty

Featured Product

RA-1

Refractory Anchor RA-1 consist of 2 components: a washer and a stud. If you need to order these sepa...