REINFORCEMENT NEEDLES/FIBERS

Melt Extract Needles

Melt Extract Needles are the most widely accepted and economical needle additive used within the refractory industry. Melt Extract needs are offered in a wide range of chemistries, lengths and diameters. Years of experience have shown that Melt Extract Needles are the product of choice when gunning refractory due to their ability to flow easily through hoses without clogging. RAI offers Melt Extract needles in a variety of lengths and alloys.

Cold Drawn Stainless Steel Needle - Straight

Cold drawn stainless steel needles have gained wide acceptance outside the US. Cold Drawn Needles acquire their exceptional strength from the cold drawn process. Stainless steel cannot be hardened or strengthened by thermal processing such as heat treating. "Cold working" 300 series stainless is the only method available to add additional strength to the product. Cold Drawn Wire Needles also exhibit unmatched flowing characteristics when mixed with refractory. The cold drawn process adds a very

Cold Drawn Stainless Steel Needle - Hooked

Cold drawn stainless steel needles have gained wide acceptance outside the US. Cold Drawn Needles acquire their exceptional strength from the cold drawn process. Stainless steel cannot be hardened or strengthened by thermal processing such as heat treating. "Cold working" 300 series stainless is the only method available to add additional strength to the product. Cold Drawn Wire Needles also exhibit unmatched flowing characteristics when mixed with refractory. The cold drawn process adds a very

Cold Drawn Stainless Steel Needle - Wavy

Cold drawn stainless steel needles have gained wide acceptance outside the US. Cold Drawn Needles acquire their exceptional strength from the cold drawn process. Stainless steel cannot be hardened or strengthened by thermal processing such as heat treating. "Cold working" 300 series stainless is the only method available to add additional strength to the product. Cold Drawn Wire Needles also exhibit unmatched flowing characteristics when mixed with refractory. The cold drawn process adds a very


Basket


ProductQty

Featured Product

RA-1

Refractory Anchor RA-1 consist of 2 components: a washer and a stud. If you need to order these sepa...