CORROSION PROTECTION

HT Mastic 500NF®

Dew Point Corrosion coating used behind refractory linings. Apply to furnace casing after weldment of anchors. Provides protection from chemical attack from alkali and acidic aqueous dew-point condensation. Maximum use limit 400° F with intermittents up to 500° F. Water based asphalt formulation for easy transportation and clean-up.

HT Mastic 500®

Dew Point Corrosion protection behind refractory linings. Apply to furnace casing after weldment of anchors. Provides protection from chemical attack from alkali and acidic aqueous dew-point condensation. Maximum use limit 400° F with intermittents up to 500° F. Solvent based asphalt product.

Corr-FX 600

Durable Dew Point corrosion protection that can be exposed to working surfaces up to 500° F. Formulation contains refractory materials which provide a durable hard surface. Asphalt coating. Has excellent resistance to salts, alkali and acid and mechanical abuse. Water based asphalt formulation for easy transportation and clean-up.

KilnCoat 2100

Non-hazardous water based ceramic high temperature coating that reduces oxidation inhibitor to metal surfaces. Temperature use limit is 2100° F. Contains no organic solvents or binders that dissipate at operational temperatures. In addition, KilnCoat 2100 serves as an insulation coating as well as corrosion resistance.

COMBAT 250D

COMBAT 250-D is a modified version of Combat 250, the workhorse of the COMBAT line of industrial coatings. COMBAT 250-D is specifically formulated with the addition of alumina to enhance abrasion characteristics for tough applications where coatings come in contact with abrasive slurry and dust. COMBAT 250-D withstands abrasion with less than 24 mg loss on ASTM –D-4060 at temperatures up to 250° F. Combat 250-D cures with a dark gray color. Combat 250 is self-priming and will flex with normal vi

COMBAT Tango Down

TANGO DOWN is available in two forms: Tango Down “Alpha & “Bravo.” Tango Down is specifically formulated to work as a rust preventative primer for either HT Mastic 500 or HT Mastic 500NF. Both products, Tango Down Alpha and Bravo, are designed to preserve freshly sand blasted surfaces from rust bloom infection.

COMBAT Flacjak

COMBAT “FLAcJAK” is a low cost 100% solids epoxy coating specifically designed to replace less efficient Coal Tar Epoxies. COMBAT “FlacJak” contains no VOC’s, which equates to NO SHRINKAGE after installation. When compared to conventional coal tar epoxy, less COMBAT “FlacJak” is required for identical cured film thickness.

HT Mastic 500 (t)

HT Mastic 500 (t) is a thicker TROWEL Grade of our workhorse dew point corrosion protection product HT Mastic 500. This product is thick enough to apply the entire 1/8" wet film thickness (WFT) in one application. It is available in both 53 gallon drums and 5 gallon pails.

HT Mastic 500NF (t)

HT Mastic 500NF (t) is a thicker TROWEL Grade of our workhorse dew point corrosion protection product HT Mastic 500NF. This product is thick enough to apply the entire 1/8" wet film thickness (WFT) in one application. It is available in both 53 gallon drums and 5 gallon pails.


Basket


ProductQty

Featured Product

RA-1

Refractory Anchor RA-1 consist of 2 components: a washer and a stud. If you need to order these sepa...